TeachQuill

Classroom Timer

A free online classroom timer for teachers. Run a countdown, count up, or record stopwatch laps with a clear, projector-friendly display.

  • Free to use
  • No sign-in required
  • Full-screen classroom display
Classroom timer controls
Countdown
TIME REMAINING
05:00
Ready when you are

A little time to focus, together.

Classroom timer features

TeachQuill Classroom Timer is a free browser-based timer designed for teachers and classroom activities. It supports countdown, count-up, and stopwatch modes, with preset durations, custom time settings, full-screen display, and optional sound notifications. No account or sign-in is required.

See time at a glance

The countdown ring shrinks as time runs, so the class can see how much time is left without reading every second.

Three ways to keep time

Use a countdown for a set duration, count up from zero, or run a stopwatch when you need laps.

Start from a preset or your own time

Choose 1, 3, 5, 10, 15, or 30 minutes, or enter a custom countdown up to 999 minutes and 59 seconds.

Ready for the classroom screen

Open the full-screen display to enlarge the clock. Pause, resume, reset, and lap stay available while you teach.

Hear the countdown end

Leave End sound on for a chime at zero, or turn it off and rely on the Time’s up message.

Record laps as you go

In Stopwatch, each lap stores a split and the total elapsed time. Reset clears the laps for the next activity.

How to use the classroom timer

Set the pace for quiet reading, group work, presentations, and all the moments in between.

Go to the timer
  1. 01

    Choose a mode

    Pick Countdown for a set duration, Count up for elapsed time, or Stopwatch for laps.

  2. 02

    Set your time

    Choose a preset such as the 5 minute timer, or enter your own minutes and seconds. Count up and Stopwatch start at zero.

  3. 03

    Start and share

    Press Start timer, then switch to full screen for an easy-to-read classroom display.

Four ways to use the timer in class

These are suggested classroom uses. Choose the mode that matches the activity, then adapt the length to your students.

INDEPENDENT WORK

Set a visible work period

Start a countdown for quiet reading, a worksheet, or group work so the class can see the time that remains.

The 5, 10, or 15 minute presets cover many independent tasks. Use custom time when the period is different.

TRANSITIONS

Keep a short changeover on screen

Use a 1 or 3 minute countdown while students move, collect materials, or get ready for the next activity.

Pause if the transition needs a moment longer, then resume the same countdown.

PRESENTATIONS

Track how long a turn takes

Switch to Count up when a presentation or discussion should be timed without a fixed endpoint.

Changing to Count up resets the current timer. Set the mode before the turn begins.

TIMED PRACTICE

Compare attempts with laps

Use Stopwatch when students repeat a drill and you want each attempt recorded against the running total.

Lap is available only while the stopwatch is running. Reset clears the list before the next round.

Choose the right timer mode

Each mode shows time differently. Switching modes resets the clock, the finished state, and any laps.

Compare classroom timer modes
ModeBest forMain feature
CountdownActivities with a fixed work periodShows remaining time with a shrinking ring, a visible message at zero, and an optional end chime.
Count upPresentations and open-ended discussionsTracks elapsed time in whole seconds, without a fixed endpoint or end chime.
StopwatchRepeated timed practiceShows hundredths of a second and records split and total lap times while running.

Pause a countdown before changing its length. Presets and custom time stay unavailable while that countdown is running.

Manage the timer without losing your place

Pause when you need to hold the clock. Reset when the next activity should start clean.

Classroom timer controls and their effects
ControlWhat it doesWhat to know
Start, Pause, ResumeStarts the current mode, pauses it, or continues from the paused time.After a countdown ends, the button reads Start again and begins that same duration.
ResetReturns the display to the start of the current mode and clears stopwatch laps.The countdown length, selected mode, and end-sound setting stay as they are.
Quick presetsSets a 1, 3, 5, 10, 15, or 30 minute countdown.Presets are available in Countdown and are disabled while the timer is running.
Custom timeSets a countdown from the minutes and seconds you enter.Use 0–999 minutes and 0–59 seconds. The total must be greater than zero. Pause before changing a running countdown.
End soundPlays a chime when a countdown reaches zero.Turn it off to keep only the on-screen Time’s up message. Count up and Stopwatch do not play an end chime.
Timer modeSwitches among Countdown, Count up, and Stopwatch.Changing modes resets the current time, the finished state, and any laps.
LapRecords a split and the total elapsed time.Laps can be added only while the stopwatch is running. Reset clears them.
Full screenOpens a large on-page display and keeps settings beside it.Hide collapses the settings panel. Esc leaves full screen.

Ready for a classroom display

Full screen gives the clock more room while the controls you need stay within reach.

Esc
Leave the full-screen display.
Full screen
Open a large on-page clock. Settings stay beside it.
Hide
Collapse timer settings while the display stays open.

The full-screen transition follows your device’s reduced-motion preference. The countdown ring still updates.

Does the classroom timer save your settings?

No. Timer settings and laps are kept only for this page visit. They are not saved between visits or synced to an account.

  • Refreshing the page returns to a 5:00 countdown with End sound on.
  • Mode, custom duration, laps, and the sound setting are not saved between visits.
  • If the browser blocks audio, a finished countdown still shows Time’s up.

Leave this page open to continue timing. Timestamps keep track of elapsed time when you switch tabs; browser throttling or device sleep can delay display updates and the end chime.

Frequently Asked Questions

How do I set a 5-minute classroom timer?

Choose Countdown, select the 5 minute preset, and press Start timer. The ring shows the remaining time. An optional chime plays at zero when browser and device audio settings allow it.

Can I customize the classroom countdown timer?

Yes. Enter up to 999 minutes and 59 seconds under Custom time, then select Set time. The total must be greater than zero. Pause a running countdown before changing its length.

What is the difference between countdown, count up, and stopwatch?

Countdown shows the time remaining until zero. Count up tracks elapsed time in whole seconds. Stopwatch shows hundredths of a second and records split and total lap times.

Can I display the classroom timer on a projector?

Yes. Select Full screen to enlarge the on-page display for a connected classroom screen or projector. Timer settings and the pause, resume, reset, and lap controls remain accessible. Hide collapses settings, and Esc closes the display.

Can I turn off the timer sound?

Yes. Turn off End sound in Timer settings. The countdown still displays Time’s up at zero. Count up and Stopwatch do not play an end chime.

Is the online classroom timer free?

Yes. The classroom timer is free and requires no sign-in.

Does the classroom timer work without signing in?

Yes. Open this page in a modern browser with JavaScript enabled and use the timer directly. No account is required. Refreshing restores the default 5:00 countdown and clears session settings and laps.

Will the timer keep running when I switch tabs?

Yes, elapsed time is calculated from timestamps while this page remains open. The display updates when you return. Browser throttling, a suspended tab, or a sleeping device can delay updates and the end chime. Closing or refreshing the page resets the timer.

Ready to put the clock on screen?

Choose a mode, set the time, and start the next activity.

Back to the timer
Free Classroom Timer | Countdown & Stopwatch | TeachQuill